30

2019

-

07

Choose Huaxing Wanda, and embark on a journey of endless excitement! Warm reminder: Proper installation method for inner tubes!

Author:


  Warm Reminder
  Dear valued distributor customers!
  Summer high temperatures also mark the peak season for quality defects in inner tubes. To ensure customer satisfaction, our company kindly reminds all clients and installation/repair technicians to follow the correct installation procedures during product sales and maintenance. Proper usage not only extends the service life of inner tubes but also significantly reduces the occurrence of quality-related issues. Additionally, adhering to proper installation techniques helps prevent product malfunctions caused by improper handling or errors, ultimately safeguarding users from unnecessary inconvenience.
  I. It is recommended to use talcum powder and follow the following procedure for inner tube installation:

1. Prepare a pair of socks for talcum powder

2. Place talcum powder into the socks.

3. Clear debris from the tire cavity of the outer tire.

4. Confirm that the inner tube gasket and nut are securely tightened.

5. Place the talcum powder-filled sock bags and gently pat the inner tube surface to ensure even distribution of the talcum powder, providing lubrication and separation (lubrication and isolation process).

6. Lift the talc-coated inner tube and shake it gently to remove any excess talcum powder (to prevent clumping).

7. Pat the tire cavity with the sock bag filled with talcum powder to ensure even distribution of the powder inside the cavity.

8. Place the talcum powder-filled sock bags onto the pad surface and gently pat them to ensure the talcum powder is evenly distributed across the entire surface of the pad.

9. Lift the talc-powdered pad and gently shake it to remove any excess talcum powder.

10. Place the inner tube flat into the cavity of the outer tire.

11. Inflate the inner tube with a small amount of gas to facilitate the installation of the cushion strip.

12. Assemble the inner tube and ensure that the valve stem copper seat aligns perfectly with the center hole of the pad strip washer.

13. Use a wrench to pry open the joint between the inner tube and the tire cavity, checking whether the edge of the inner tube is folded. If any folding is found, adjust it immediately to ensure proper alignment.

14. Assemble the outer tire with the steel rim, and then adjust the valve stem of the inner tube again to align it precisely with the center of the rim's valve slot.

15. For properly inflated tires, use soapy water to test the valve cores and the gaps where the valves extend from the rim for any air leaks.

16. Install the inner tube valve cap securely, and once again confirm that all component groups are properly assembled.

  II. It is recommended not to come into contact with the inner tube using dishwashing detergent solution, laundry powder solution, or any oils. Failure to follow this recommendation may result in the following quality issues with the inner tube.

  III. We recommend that all drivers pay close attention to their tire conditions during summer, as temperatures are not only high but also accompanied by high humidity. Stay safe on the road!
  We would like to thank everyone for your support and cooperation with our company! Please remember that the weather is hot and temperatures are high—be sure to take breaks and stay cool to avoid heat-related discomfort.

Sales Department, Chaoyang Huaxing Wanda Tire Co., Ltd.